View Full Version : Parting out 81 standard full dresser

06-05-2008, 10:01 AM
guys, i have 2 1100's now and 81 MNS and an 81 Standard, the standard has a problem with 1st, and 2nd gear but other than that it runs well. My 81 MNS runs good and has a solid tranny so i'll be keeping it and parting out the Standard.

With that said, let me know what you need. I'll leave it for you guys untill I finish breaking everything down. As soon as i have it in parts anything you guys have'nt bought i'll post on ebay. The only work i've had done to it is the carbs have been cleaned and rebuilt. I had a local shop do it.

06-05-2008, 11:49 AM

How much do you want for the front brake line assembly from the master to the calipers?


06-05-2008, 12:09 PM
make me an offer, do you mean including master and calipers?

06-05-2008, 12:45 PM
I just want the 3 front brake lines and the junction joint. Check your PM's.


06-06-2008, 08:06 AM
The controls are spoken for, but the stator, rectifyer(sp?) and seat are open. It's a king/queen seat. Just PM me with offers and we'll work it out.

06-07-2008, 09:04 AM
Parts that are gone or spoken for:
Front brake lines and junction
hand controls
just naming a few parts that are still here (theres much more than on the list)

Carbs (good condition)
Front fairing
hard bags
top rack with case
Master cylinders
and much more...

06-07-2008, 02:29 PM
If it has a tubeless 17" rear wheel, I'd be interested. How much with shipping to Oregon. BTW, I don't need or want to pay the shipping on the tire.


06-07-2008, 07:54 PM
Make me an offer on the wheel, i've recently looked up shipping to oregon, 20lb priority mail is about 36 bucks + cost of shipping material (about 4 bucks)

06-07-2008, 10:12 PM
Originally posted by Ozmodius
Make me an offer on the wheel, i've recently looked up shipping to oregon, 20lb priority mail is about 36 bucks + cost of shipping material (about 4 bucks)

Do you have a FedEx site near you? FedEx ground is about the best deal in shipping around. Adding priority mail rates to it would leave much to offer you on the wheel.


06-07-2008, 10:51 PM
plenty of Fedex around here .. hehe. Their main office is in Memphis (close to where i work). Give me your zip code and i'll look it up. Mine is 38611 in case you want to check on it aswell.

06-08-2008, 10:34 AM
Originally posted by Ozmodius
plenty of Fedex around here .. hehe. Their main office is in Memphis (close to where i work). Give me your zip code and i'll look it up. Mine is 38611 in case you want to check on it as well.

I'm at 97229 and you can eMail me at technojock@yahoo.com to continue this deal.


06-12-2008, 12:09 AM
Would the Top and side bags work on a 79 standard?

Are they spoken for yet?

06-12-2008, 08:38 AM
They are not spoken for. As for fit, I have no idea. Ask around in the forum i'm sure someone knows.

06-12-2008, 12:20 PM

i need a good set of mirrors and the plastic side covers.thanks blackdawg

06-12-2008, 02:15 PM
the Mirrors are in good shape, the side covers are NOT in good shape. PM me an offer and we'll work it out.

06-12-2008, 04:45 PM
hows 20 bucks for the mirrors .you said they are in good shape.they are not loose.how much shipping 11565-96a ave surrey ,bc canada ,v3v-1z9.and what is your address thanks john

06-13-2008, 09:27 AM
Blackdawg, check your PM's

06-19-2008, 10:48 AM
here are some more pics of the cases and mufflers

HERE (http://www.flickr.com/photos/14892383@N04/)

06-19-2008, 10:01 PM
I'm looking for a set of non air fork caps to fit my 78E, not the whole forks, just the caps. I know you probably don't want to rob a good set of forks , but if you have extra caps I'm interested.

06-20-2008, 09:12 AM
yea, i'd hate break the forks up they're in great shape.

06-20-2008, 08:46 PM
I wouldn't want you to, I'll find some eventually, it's no big deal, I just wanted to change from my home made air caps back to standard non air caps with preload adjustment. For now I've removed the air fittings and plugged the holes and set the preload with spacers and it handles pretty good for now, so I'll ride it that way until I find some.

06-20-2008, 09:04 PM
I would like to know what you want for the mufflers, trunk and bags seperate or together however you are going to sell them.
I also have a 1981 xs1100 full dresser with a couple of parts missing. The back crash bar which hooks on the shock and muffler bracket is the same as a special and won't fit my 1980 or 1979 xs standard. I had a standard crash bar and simply switched them and it works fine.
I probly have some of those non air ends off a 1978 also but will double check to make sure.

06-20-2008, 09:14 PM
Mufflers are spoken for and someone is looking at the bags but has not made an offer. Make me an offer on the bags... would you want the guards for the bags and topcase as well?

06-20-2008, 11:02 PM
thanks! wayneshrt, if you find the fork caps PM me and we'll strike a deal.

06-26-2008, 12:19 PM
Looks like the Seat, Tank, stator and rectifyer are back up for grabs.

07-02-2008, 04:46 PM
Hey Oz, I'm looking for a decent seat, a kick/side stand, and guages (speedo, tach, etc). Still available? Let me know. Thanks.


07-03-2008, 06:44 AM
will the side covers fit on an xj 1100? If so what do you want for them, if you still have them. Scratched is ok. I plan on repainting.

07-03-2008, 08:46 AM
seat, guages and kickstand are available. Make me an offer.

the side covers are trashed,.... read broken.

07-05-2008, 01:10 AM
I'm looking for the lock cylinders and keys for the saddle bags and front fairing compartments. Are those avalible

07-07-2008, 10:44 AM
I really dont want to split those off the bags.

07-07-2008, 06:18 PM
do you have a front brake master cylinder assembly that works .if so how much

07-08-2008, 08:47 AM
yep, I sure do. make me an offer.

07-09-2008, 08:51 PM
i'm not to sure what to offer looking for fuel petcock valves it's really up to how much you value your bike , but i'll start with a small offer of $ 35.00 for two good fuel petcocks and master cylinder. work from there.

07-09-2008, 09:08 PM
check your PM's

07-24-2008, 08:47 PM
Got an oil sender unit?

07-24-2008, 09:23 PM
I'm pretty sure it went with the engine.