XS11.com Forums

XS11.com Forums (http://www.xs11.com/forum/index.php)
-   Carburetors & Fuel System (http://www.xs11.com/forum/forumdisplay.php?f=45)
-   -   Jetting Recommendations (http://www.xs11.com/forum/showthread.php?t=382)

xs11 07-15-2002 09:16 PM

Jetting Recommendations
 
Jetting Recommendations
by Denny Zander

Here is a simple set of jetting guidelines that have worked for me. For those considering jet changes, this might help select a starting point.

1 jet size for custom 4 into 2 exhaust

2 jet sizes for 4 into 1 exhaust

1 jet size for K&N filter (single inside airbox)

1 jet size for drilling out the bottom of the airbox

3 jet sizes for individual filters

2 jet sizes for no muffler (open header)

1 pilot jet size for every 3 main jet size increase

Add up all the jet size increases and subtract one. (Remember they go in steps of 2.5 for each jet size)

Under a mismatch condition, like individual filters and stock exhaust or 4 into 1 header with stock filter and air box, subtract an additional 1 jet size.

Check plug color often, sync carbs after each jet change, make sure the floats are set correctly, and seriously consider purchasing a Colour Tune. (See "Colortuning Carburetors" in the Maintenance Section).

Make sure your carbs are in perfect working order before making jet changes.

Example from my '79 XS1100 F:
Stock main jets: 137.5

Stock pilot jets: 42.5

2 sizes for 4:1 exhaust (Jardine)

1 size for single K&N

1 size for drilled air box

4 (main sizes) - 1 = 3 or 137.5 + (2.5 * 3) = 145.0
1 (pilot jet size) or 42.5 + (2.5 * 1) = 45.0

With this jet configuration I get 32-38 mpg on the open road, Smooth idle, very strong exceleration from off idle to 80+ mph, and steady pull past 120 mph. My "F" has 76K mile on it, of which I have put 44K with this jet configuration.

I have applied this to the '78-'79 carb set with great success. These guidelines should work for the '80-'81 carbs also. The only part I have not tested is pilot jet changing on the second generation carbs.

here are jet pictures for reference
http://www.xs11.com/forum/images/tip...0-carbjets.jpg
a air jet - b main jet - c pilot jet (some have different # of holes)
d various needle jets (emulsion tubes) - e two styles of float needle valves and float needles

(note: there are several styles of Mikuni main jets - the ones of interest to us are the 'large round' style)

http://www.xs11.com/forum/images/tip...830-needle.jpg
Needle (jet needle)


Happy Jetting


All times are GMT -6. The time now is 11:21 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

Integrated by BBpixel ©2004-2019, jvbPlugin