View Single Post
  #11  
Old 10-24-2017, 01:12 PM
darylcaribou69 darylcaribou69 is offline
XSive
 
Join Date: Oct 2017
Location: Orono, ME
Posts: 52
When setting the float height do I measure 23mm from where the gasket sits on the carb (the aluminum carb surface itself)? Or do I put the gasket down then measure 23mm (from the gasket surface)? Ive read both on these forums.
__________________
1980 special
stock except for 4 into 2 exhaust
Reply With Quote