View Single Post
Old 08-20-2020, 03:36 PM
skids's Avatar
skids skids is offline
XS-XJ Super Guru
Join Date: Jul 2002
Location: Florissant, CO, USA
Posts: 4,958
John, I broke a “goal post” many years ago. I did not JB Weld it because i knew it was not gasoline proof. I just reinstalled the float and pin as-is. It worked fine. Yours will be also as long as the pin is seated on the remaining side. The thing that worried me about the JB Weld is that it could slowly dissolve and end-up in a carb passage or re-solidify on a hot exhaust valve.
Skids (Sid Hansen)

Down to one 1978 E. Stock air box with K&N filter, 81H pipes and carbs, 8500 feet elevation.
03 Honda ST1300 ABS
Reply With Quote