View Single Post
  #12  
Old 10-19-2012, 10:57 AM
CaptonZap CaptonZap is offline
XS-XJ Guru
 
Join Date: Jun 2010
Location: Denver
Posts: 1,748
Quote:
Originally Posted by warpin987 View Post
So After testing the tci box a little more I am not getting any voltage out of the white/red connector on the TCI box. Is it the box or wiring? I re soldered and still no voltage.
That is the power input to the TCI, so if you don't have any voltage present, go check the rear fuse in the fuse box. There should be 12 volts at the tan wire, then through the fuse to the red/w wire. If you have it there, there is a open in the r/w wire going to the TCI. The run/ stop switch might be in the wrong position, or disconnected. CZ
Reply With Quote