View Single Post
  #16  
Old 03-14-2014, 08:37 PM
DGXSER's Avatar
DGXSER DGXSER is offline
Doctor of XSology(Deceased)
 
Join Date: Nov 2008
Location: Cincinnati, Ohio
Posts: 9,769
Look at your handle bar switch on the right side. You will need to pull the seat and tank off the bike, then you can see the connector from that switch near the coils up front on the right side of the frame.

Look at the connector and see if it has three or four wires. Three wires will be two red/white and one blue wire. The four wire connector has those three and a black wire in it. If it has the black wire, that should be your ground in place of the bars.
__________________
Life is what happens while your planning everything else!

When your work speaks for itself, don't interrupt.

81 XS1100 Special - Humpty Dumpty
80 XS1100 Special - Project Resurrection


Previously owned
93 GSX600F
80 XS1100 Special - Ruby
81 XS1100 Special
81 CB750 C
80 CB750 C
78 XS750
Reply With Quote