View Single Post
Old 06-30-2010, 07:11 PM
tinman905's Avatar
tinman905 tinman905 is offline
XSive Maximus
Join Date: Aug 2007
Location: Orangeville,Ontario ,Canada
Posts: 946
If you tell us a bit more about your bike ,stock or with what mods. What # jets do you have in the carbs now. It's difficult to help without more info. If you have a Dyo Jet kit your needle should be set at the second groove down from the top. Also check what air jets you have they should be #190 if it's a Dyno Kit.
BDF Special
80SG Vetter bagger 1196 Wiseco big bore kit, Mega Cycle Cams, slotted cam gears, ported and flowed head, bronze intake seats, Dyno Jet kit, Dyno coils and Mikes XS air pods, Venture cam chain adjuster,Geezer's regulator, Clutch mod, Mac 4 into 1 with custom built and tuned baffle, Oil cooler,MikesXS emulators mod.
Dyno tuned to 98 hp at the rear wheel.
Reply With Quote