Thread: Engine parts
View Single Post
Old 09-13-2010, 09:45 PM
DGXSER's Avatar
DGXSER DGXSER is offline
Doctor of XSology(Deceased)
Join Date: Nov 2008
Location: Cincinnati, Ohio
Posts: 9,769
Not 100% positive, but I do not think you can get stock size rings anymore, but some have bought 1st iver and filed to fit in the stock bore.

Geezer is procuring S/S valves and reselling to the forum. Check with him on those. Otherwise I think you get "slightly" used ones from fleabay and the like.

As to cams, many have mixed and matched the cams from different years here. Dan Hodges has provided great info and feedback on his results. I think Big Daddy Funk put some cams into his HotRod bike Tinman just procured as well.

As to jetting, there is a guide on the forum of how to jet with what mods, but anyway you go about it you will need to do trial and see. Especially if you play with the cams. Then there is a couple who have gone to FI, so you could go that route.
Life is what happens while your planning everything else!

When your work speaks for itself, don't interrupt.

81 XS1100 Special - Humpty Dumpty
80 XS1100 Special - Project Resurrection

Previously owned
93 GSX600F
80 XS1100 Special - Ruby
81 XS1100 Special
81 CB750 C
80 CB750 C
78 XS750
Reply With Quote