Home arrow Forums



Go Back   XS11.com Forums > Maintenance > Wheels & Suspension

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 04-27-2011, 06:03 PM
crazy steve crazy steve is offline
XS-XJ Guru MODERATOR
 
Join Date: Jan 2009
Location: Beautiful outer Yelm, WA
Posts: 7,932
Difference Between Tube and Tubeless Wheels

Just a few quick pics to illustrate the actual differences between the tube and tubeless wheels...

[IMG][/IMG]

The rear wheels are identical except for the holes for the 'bead locks'... tube wheel on the left.

[IMG][/IMG]

.. but the fronts aren't; again, tube wheel on the left. Several things going on here; obviously, these are machined much different. The tube wheel has that odd curved recess for the tube, but more important, the sealing area at the edge is less than half the width of the tubeless wheel (.200" vs .410"). I know guys are running these wheels tubeless, but I'd personally be pretty hesitant to do that. Get a low tire and you could lose the bead seal...

[IMG][/IMG]

But that's not the only differences; the tube wheel is a different casting, not just machined different. The tube wheel is on the right in this pic, and you can see that the rotor mount is the obvious difference, but what's less obvious is the tube wheel is a heavier casting; the thickness of the spoke webs is .050" thicker over the tubeless wheel. The tube wheel weighs almost a pound more.

You can convert the rear wheel to tubeless, look here: http://www.xs11.com/forum/showthread.php?t=35440
__________________
Fast, Cheap, Reliable... Pick any two

'78E original owner - resto project
'78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
'82 XJ rebuild project
'80SG restified, red SOLD
'79F parts...
'81H more parts...

Other current bikes:
'93 XL1200 Anniversary Sportster 85RWHP
'86 XL883/1200 Chopper
'82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
Cage: '13 Mustang GT/CS with a few 'custom' touches
Yep, can't leave nuthin' alone...

Last edited by crazy steve; 02-18-2013 at 11:48 AM.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump


All times are GMT -6. The time now is 01:55 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Integrated by BBpixel ©2004-2019, jvbPlugin