Home arrow Forums



Go Back   XS11.com Forums > Repairs > Engine

 
 
Thread Tools Display Modes
  #1  
Old 06-20-2002, 08:06 PM
xs11 xs11 is offline
Super Moderator
 
Join Date: Jun 2002
Posts: 130
Spark Plug Thread Repair

Spark Plug Thread Repair

Blaine Hoopes
I did an insert, not really a helicoil but the same general idea, in an outboard motor that I didn't want to pull apart.

To prevent metal shavings from entering the cylinder I did the following:
  • I took a Shopvac and hooked it up to BLOW instead of suck
  • Connected the hose to the exhaust
  • rotated the engine until all the air was coming out the sparkplug hole that needed fixing
  • Did the tap with the air blowing all the bits out of the hole (and into my face)

The engine was horizontal so gravity wasn't pulling the bits into the hole and it worked great. If you don't want to pull the head I'd try that and maybe lay the bike on it's side so the air has an easier time blowing the filings out.

Dave Hill
I went up to my local auto supply and bought a Heli Coil repair kit. It came with a 1.25mm thread tap, and I was able to repair the treads of the #2 spark plug hole. I used Blaine's idea to put the vac on the exhaust, and was hit by the shrapnel in the forehead many times.
The kit came with some new steel inserts that would require you to drill out with a 5/8" drill bit and put in the insert. I like this fix better than the old coil type, and I may do this eventually, but now it is working fine since I repaired it with the tap.

Sid Hansen
I would be afraid to do the helicoil thing without removing the head. All of those cuttings and snipping the helicoil... Maybe if you had a borescope and microsurgical instruments --- never mind!

Just take off the head! You might just consider continued use if you can torque the plug on the "light end" of the torque range and it stays tight and doesn't leak. If you can do this, you can do the helicoil fix next time the head if off.

 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump


All times are GMT -6. The time now is 10:38 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Integrated by BBpixel ©2004-2019, jvbPlugin