Home arrow Forums



Go Back   XS11.com Forums > Repairs > Engine

 
 
Thread Tools Display Modes
  #1  
Old 04-16-2013, 05:17 PM
mack mack is offline
XS-XJ Guru
 
Join Date: Sep 2009
Location: Ontario, Canada
Posts: 2,338
Rebuilding Upper Vibration Dampers

I picked up a vibration at about 4800 rpm and it increased right through to the red line. I searched the bike for loose stuff but found nothing. Eventually looked at the motor mounts and found the culprits. I made a repair and so far it works like a charm and only cost me $10.30 to do four mounts. Video.....

http://youtu.be/qsYtfQahBIQ



This is the finished product.
The two bushings with flutes cut in are generic "stabilizer arm" bushings, common to many GM (and other) cars. Go to any automotive parts store and ask for a stabilizer arm kit. Unless you go to a very expensive foreign car dealership, all these kits will have the same bushings. I found the used ones were closer to the flexibilty of the ones I took out of the bike and are exactly 28mm. The new ones are stiffer and are 31 mm. But a quick roll on your bench grinder will take off as little as you need for them to fit snuggly.

The radiator hose was selected for both it's thickness and it's resistance to heat. I figured that some heat would be transfered from the pipes and block , thru the cup washer. So the radiator hose washer is to protect the more flexible roof vent washers. They were selected because of the flexibility, you could use three and it would still work and fit in the brackets no problem at all. I felt the greater flexibility would absorb the vibration better and it does. Dramatically. Come to think of it, next set I do will have three of the roof vent washers in them.
__________________
mack
79 XS 1100 SF Special
HERMES
original owner
http://i946.photobucket.com/albums/a...ps6932d5df.jpg

81 XS 1100 LH MNS
SPICA
http://i946.photobucket.com/albums/ad305/mack-055/2.jpg

78 XS 11E
IOTA
https://youtu.be/wB5Jfbp6SUc
https://youtu.be/RaI3WYHSuWA



Have recovery trailer and shop if you breakdown in my area.
Frankford, Ont, Canada
613-398-6186
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump


All times are GMT -6. The time now is 03:01 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Integrated by BBpixel ©2004-2017, jvbPlugin