Home arrow Forums



Go Back   XS11.com Forums > Repairs > Carburetors & Fuel System

 
 
Thread Tools Display Modes
  #1  
Old 03-27-2012, 11:12 AM
crazy steve crazy steve is offline
XS-XJ Guru MODERATOR
 
Join Date: Jan 2009
Location: Beautiful outer Yelm, WA
Posts: 7,932
Easy Bench Sync Method

One thing that needs to be done after rebuilding or even sometimes just working on your carbs is a 'bench sync'. This is the process of setting each carb's throttle opening so they're all as equal as possible without being open too much so you can start the bike in order to do the proper vacuum sync and other carb adjustments; this is not a substitute for that! There's been multiple methods for 'bench syncing' carbs discussed here over the years, ranging from using 'bread ties' to small drill bits, etc. Finally, here's a pretty easy way to do this with only a screwdriver. All credit for this goes to trbig (Tod) for posting this including the pics. So... here it is!

Inside the throat of the carbs at the top, there are 3 small holes.







When you go to install the carbs the first time, adjust the butterflies so that the front edge of the butterfly splits the first hole right in the middle like so...







This gets the bike started and you can synch it from there.

Again, credit and the big thanks goes to trbig for this!
__________________
Fast, Cheap, Reliable... Pick any two

'78E original owner - resto project
'78E ???? owner - Modder project FJ forks, 4-piston calipers F/R, 160/80-16 rear tire
'82 XJ rebuild project
'80SG restified, red SOLD
'79F parts...
'81H more parts...

Other current bikes:
'93 XL1200 Anniversary Sportster 85RWHP
'86 XL883/1200 Chopper
'82 XL1000 w/1450cc Buell, Baker 6-speed, in-progress project
Cage: '13 Mustang GT/CS with a few 'custom' touches
Yep, can't leave nuthin' alone...
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump


All times are GMT -6. The time now is 04:49 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Integrated by BBpixel ©2004-2018, jvbPlugin