Home arrow Forums

Go Back   XS11.com Forums > Maintenance > Engine

Thread Tools Display Modes
Old 06-20-2002, 02:06 AM
xs11 xs11 is offline
Super Moderator
Join Date: Jun 2002
Posts: 130
Replacing The Clutch

Replacing The Clutch
by Justin Lassy

I replaced my clutch at about 26K miles because it was slipping under full throttle.

Of course, be sure to check all your clutch adjustments before spending any $$$ (both cable freeplay, and the mechanism on the clutch cover). After that, go to your local dealer or mail-order place and spend $124 dollars or so on a complete Barnett Clutch Kit which includes heavy duty springs, friction plates, and clutch plates.

Replacing the clutch is very easy. Be sure to lubricate all parts liberally with new engine oil. I have replaced my stock clutch with this very kit, and love it. I love it so much I've been thinkinng about putting a Barnett clutch in my perfectly good V-Max clutch. Until the Barnett clutch breaks in, its a little difficult to get into neutral. You will learn to blip the throttle a bit and get right in there. The clutch action is smooth and wonderful. Works fine with synthetic oil, also.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump

All times are GMT -6. The time now is 06:44 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Integrated by BBpixel ©2004-2022, jvbPlugin