Home arrow Forums

Go Back   XS11.com Forums > Modifications > Carburetors & Fuel System

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-25-2008, 09:50 PM
Ivan's Avatar
Ivan Ivan is offline
XS-XJ Guru
Join Date: Jul 2008
Location: Hutchinson KS
Posts: 2,522
El cheapo Pod Filter mod (my version)

I got my hands on a set of the K&N knock off filters. I have seen posts about the rubber insert closing off the jet ports, so this tip will correct that issue. I also found the filters fell off the rubber piece too easily when installed.

Here is what I came up with. Took a spare airbox and removed the tubes:

I cut the tubes just aft of the retaining groove:

Removed the rubber insert from the pod filters:

Crammed the tube into the pod filter. It is a chore, but it will go. Much more snug than the rubber insert included with the filter.

Noticable difference in power. Nothing earth shattering, but there is a boost. This will likely lean out the mixture, so a rejet with bigger jets will probably be needed. I also found a breather filter that looks similar to these at Oreilley's, for about $10. Not bad for less than $50
Ich habe dich nicht gefragt.

Last edited by crazy steve; 02-14-2012 at 08:29 AM.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump

All times are GMT -6. The time now is 05:53 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Integrated by BBpixel ©2004-2022, jvbPlugin