Home arrow Forums

Go Back   XS11.com Forums > Maintenance > Carburetors

Thread Tools Display Modes
Old 06-19-2002, 06:21 PM
xs11 xs11 is offline
Super Moderator
Join Date: Jun 2002
Posts: 130
Carburetor Float Pin Removal

Carburetor Float Pin Removal
JP Honeywell - text
Ken Talbot - photo

Several XSives, have broken a 'post' trying to remove the float pin on their carburetor. Typical damaging methods include:

  • Using a nail and hammering the pin out

  • Using pliers and pulling the pin out

  • Using a screwdriver or chisel to pry the pin out

  • and no doubt others I haven't heard.

By far the safest and easiest method I have found is to use diagonal cutters (aka dykes or wire cutting pliers). Squeezing the "ground jaws" of the cutters around the "head" of the float pivot pin, slowly, works like a wedge. It gently removes the pivot pin out about 1/16" - just enough to easily remove it - without damage to the post. Sort of like pulling a nail but all you have to do is partially close the cutters. Just be careful reinstalling the pin so that you don't damage the posts putting it back. And a tip-o-the-hat to long-lost Phil Stewart for teaching me this.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump

All times are GMT -6. The time now is 03:57 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Integrated by BBpixel ©2004-2022, jvbPlugin