Home arrow Forums



Go Back   XS11.com Forums > Idle Talk Forum > XS11/XJ11 Discussion

Reply
 
Thread Tools Display Modes
  #16  
Old 02-14-2018, 08:50 PM
MPittma100's Avatar
MPittma100 MPittma100 is offline
XS-XJ Guru
 
Join Date: Aug 2011
Location: Atlanta, GA.
Posts: 2,145
Head

If you need valve seals, bite the bullet and pull the head. Take it to a reputable machine shop. They will clean head, resurface, grind valves and seats, replace seals, and adjust valves. DONE DEAL! Ready for another 45 years.
__________________
1981 XS1100H Venturer
K&N Air Filter
ACCT
Custom Paint by Deitz
Geezer Rectifier/Regulator
Chacal Stainless Steel Braided Brake Lines
Chrome Front Rotor & Caliper Covers
Stebel Nautilus Horn
EBC Front Rotors
Limie Accent Moves On In 2015

Mike
Reply With Quote
  #17  
Old 02-15-2018, 01:00 PM
dansmith65 dansmith65 is offline
XSive
 
Join Date: Aug 2017
Location: Creston, B.C. , Canada
Posts: 51
Thanks for the additional feedback. I was hoping NOT to have to change the valve seals or remove the head this year. When it last ran, I didn't notice smoke from the exhaust, so I'm hoping these valve seals will last me another year, at least.

Once I get the valve lash adjusted properly, I'll check compression and re-evaluate; as per the advice from another thread.
__________________
80 SG Canada
Reply With Quote
  #18  
Old 02-16-2018, 10:56 PM
TopCatGr58's Avatar
TopCatGr58 TopCatGr58 is offline
Administrator
 
Join Date: Jul 2002
Location: Portsmouth, Va.
Posts: 12,556
Hey Dan,

To save you some teardown time/$$ this year, they also make a rubber seal conditioner that can be added to the OIL to help re-soften rubber seals like the valve seals to possibly help them seal better, for a while at least.

I don't know exactly what's in the conditioner and whether it can affect the wet clutches??

PS, did some research, found 3 of the newest formulations/brands:
Lucas Oil stop leak, Blue Devil, and Bars Leaks stop leak.

Found this info on FAQ for Bars Leaks:

Quote:
Will Barís Leaks Oil Seal Engine Oil Burning & Leak Repair work in my engine?

Yes, your vehicle is a good candidate for this solution if it does not consume more than one quart of oil per day. We have designed this product to work in all gasoline and diesel engines including turbocharged, EcoBoost, hybrid and even racing engines. This covers 3, 4, 5, 6, 8 and 10 cylinder engines in all cars, trucks, vans and SUVís, also can be used in heavy-duty applications referencing the appropriate dosage level. This applies to a wide range of other motor applications too: tractors, boats, RVís, motorcycles (including wet clutch), ATVís, lawn equipment.
Here's the webpage link:
https://barsleaks.com/product/oil-se...g-leak-repair/

Here's a webpage with background info on Previous formulations that were NOT good for the engine/seals, along with explanation of latest formulations.

http://axleadvisor.com/best-engine-oil-stop-leak/

HTH, T.C.
Reply With Quote
  #19  
Old 02-17-2018, 07:52 AM
BA80's Avatar
BA80 BA80 is offline
Doctor of XSology
 
Join Date: Oct 2010
Location: Tulsa, Ok
Posts: 9,532
Read the title of this thread and was thinking that must be a pretty sexy airbox if you got wood.
__________________
Greg

Everybody is a genius. But if you judge a fish by its ability to climb a tree, it will live its whole life believing that it is stupid.Ē

― Albert Einstein

80 SG Ol' Okie;79 engine & carbs w/pods, 45 pilots, 140 mains, Custom Mac 4 into 2 exhaust, ACCT,XS850 final drive,110/90/19 front tire,TKat fork brace, XS750 140 MPH speedometer, Vetter IV fairing, aftermarket hard bags and trunk, LG high back seat, XJ rear shocks.

The list changes.

Visit XS11.org too......
Reply With Quote
  #20  
Old 02-19-2018, 10:25 AM
dansmith65 dansmith65 is offline
XSive
 
Join Date: Aug 2017
Location: Creston, B.C. , Canada
Posts: 51
Thanks T.C. that's a good idea. I bookmarked it to look into before I put fresh oil in.

Greg, sorry this thread wasn't more interesting and my airbox wasn't so sexy.
__________________
80 SG Canada
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:42 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Integrated by BBpixel ©2004-2018, jvbPlugin