Home arrow Forums



Go Back   XS11.com Forums > Maintenance > Engine

 
 
Thread Tools Display Modes
  #1  
Old 06-20-2002, 06:04 PM
xs11 xs11 is offline
Super Moderator
 
Join Date: Jun 2002
Posts: 130
Clutch Cleaning and Refurb

Clutch Cleaning and Refurb
by Ralf Koehler
6/19/00


A couple of weeks ago I was complaining about my dreadful clutch, hardly disengaging at all, grinding 1st and 2nd gear teeth... I found out that it was plain adhesion causing the stickyness!

I took it all apart and performed the following work:

  • Meticulous filing of all edges on friction plates, steel plates, hub & clutch basket
  • Light sanding of old friction plates (thickness after 60k = new value) with automotive 120 grit paper to get rid of the glaze
  • Medium sanding of steel plates with 80 grit; cleaned everything with turpentine
  • Mounted steel plates 180 degrees turned, so that rounded edges now face the crankcase
  • Added 0.070" shims to springs (yes, I've got strong hands)
  • Treated new gasket with PAM Spray (both sides)


The result is amazing; the clutch works almost like new. Works out my left hand too. Total investment was several hours of labour plus one cover gasket. Actually, I had to use hammer & chisel to knock loose the 27 mm nut.

One more tip: once you have that side cover off, don't miss the opportunity to clean the inside of the metal piece behind the oil level window!
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump


All times are GMT -6. The time now is 07:54 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Integrated by BBpixel ©2004-2019, jvbPlugin