|
On 21 Jul 2001, at 1:52, Ben Matthews wrote:
I tried to inspect if the pads are worn but the manual just
says "look and see if they are worn to the *red*," but I
cannot see any red down in the assembly anywhere. Even
cleaned out spiderwebs and dust. Is there a clear pic
of what I am supposed to be looking at?
The pads are made with a wear indicator groove
which you should be able to see through the inspection
port on top of the caliper.
If they're worn down so the groove is gone, it is
time to replace them.
Ken Talbot
|